Fire Resistant (FR) Boots, also known as Safety Boots, are for those who very often step over sharp objects, hard as well as wet floors, have heavy items fall on their feet, etc.

The features, uses, and specifications of these boots can be known from any FR clothing store; cited below are some initial information:

Basic Features of Fire resistant Boots: 

There are some very basic characteristics that every user and buyer should be aware of: 

Variance in toe caps: 

There are two types of toe caps – Steel and composite. Steel toe caps are a more preferred choice because of their ability to resist compression, durability as well as their less price, but they are much heavier.

But composite toe-caps made of a polymer can also perform the required work to a considerable level yet is far easier and comfortable to work around with as well as don’t conduct heat, unlike steel. 

Changes with changing profession: 

Safety boots are needed for work sites bound with danger like construction sites, fire brigades, electrical working sites, etc. Such workers are subjected to according risks.

Each and every risk has its own solution; that is, the requirements of a safety boot of a firefighter will be different than that of one working in a construction site. Therefore, buy them accordingly from any official Fr Outlet.

Different types of quality: 

There are certain strengths of these boots, which makes one different from the other. These levels are based on the features a user will require. Some of them are P = Penetration Resistance; I = Electrically Insulated, CRE = Chemical Resistance, WR = Water Resistant, AN = Ankle Protection, HRO = Outsole Resistance to hot contact, etc. and much more.

Variety of Sole Type: 

FR Boots Sole Break

Fire resistant boots can also be distinguished on the basis of its sole; there are five most common type of Sole that are used in Safety boots, these are PU SOLE – this is kind of the best for not only is it lightweight and easy to use, but its safety features are also amazing.

Next, we have PU DOUBLE DENSITY and SINGLE DENSITY soles, which differ with their safety issues, where the first has a more appreciable safety quality; the latter has a moderate one.

PVC SOLE is no doubt good in its job but is very heavy and thus not so comfortable to wear. Lastly, RUBBER SOLE is used for high-temperature operations.

Suggested Read: Best Formal Shoes for Men

Do’s: –  

There are some definite rules which should be strictly known and followed before purchasing any Fire resistant boot, they are;

Adhere to OSHA Regulations: 

The guidelines of the Occupational Health and Safety Administration OSHA, in short, is the ultimate institution one should abide by.

Your FR boots should be meeting each and every requirement cited there. OSHA, which is a universal body, sees to the fact that employers working under hazardous conditions are provided with proper footwear.  

Select the correct fit: 

Always remember that you will have to work with those boots on. So neither getting yourself an extremely tight-fitting boot will turn out to be beneficial nor a very loosely fitting one.

Because whereas in the first case, you can experience sudden pain for the latter instance if the shoe is always falling off the entire purpose will not be fulfilled.

Fire resistant Boots Fitting

Always opt for a renowned brand: 

Safety Boots has always to be branded and that too from a well-known brand. If in any instance, you pick up an unbranded item, then there is a much higher risk of getting harmed; because where branded items have the assurance of restricting the specifications to some globally acclaimed institute, local items lack that assurance.

Check the specification: 

When you are picking up a Fire resistant boot, your first reason to select or unselect it will be the specifications given. F2413 refers to the level of foot protection. Also, if you are to subject these boots to chemicals, oils, flammable liquids, heavy materials, etc. they should be with S1, S2, S3, etc. IF you will be working with electronics, then ESD is a safe option, etc. This is how it goes.

Suggested Read: PUMA AND SPARCO Sneakers

Don’ts: 

There are some big NOs that everyone buying FR boots must be aware of, if not then it may turn to be very disadvantageous;

Buy cheap stuff: 

Do not ever compromise with your FR Boots. Keep in mind that here your life is at stake. A single mistake, and you are done away with life. Always go for quality items; after a few years considering its usage and service, you will realize that your purchase was quite a less expensive one.

Go for a second-hand item: 

Never make this critical mistake. You will have no idea as to what extent the boots have been used and till when it can save you. And if, in any case, you are misled, and you expose it to a condition which is not to be, then the extent of the harm can be actually grave.

Ignore the comfort factor: 

Comfort is also one of those important things to be kept in mind. For you’ll have to perform hardcore work on the sites exposing yourself to not so favorable conditions, which is nothing fashionable, and this cannot be done if you are not comfortable enough. 

Misuse or Overuse: 

Extremes of anything aren’t welcomed. Where on the one hand, you should care and treat your boots well enough, at the same time if they are damaged to the extent that cleaning and washing it will not suffice or is torn and worn out do not continue to use, get a new one.

Another specification is EN ISO 20345:2011; this is an additional safety measure for purchasing safety boots. This has been recently updated to resist an impact of 200 Joules, which is a weight of 20kg. 

Suggested Read: Best  Japanese Sneaker Brands

These shoes are resistant to not only extreme conditions but to all climatic conditions, for instance, sun, snow, rain, wind, etc. If you have any doubt based on a particular product, don’t hesitate to straight away head for the manufacturer and solve the issue immediately. 

LEAVE A REPLY

Please enter your comment!
Please enter your name here